How To Block About Clients Using A Dhcp Server On Mikrotik Routers.

Hello guys inwards this tutorial am going to exhibit how to exercise your DHCP server to block unopen to users from accessing your network.
This is going to travel really slow as well as elementary tutorial thence all yous require do, is to proceed reading if yous desire to block specific users from accessing your network piece nevertheless using your mikrotik devices.

First of all nosotros are going to login into our mikrotik device using winbox application as well as the right authentication parameters.

username : Admin
password:Admin

Then hitting the travel inwards key.
This volition direct keep yous to the device principal bill of fare were yous volition sum command of the entire configurations.





click on >>>> IP.
click on >>>>DHCP server.
click on >>>> Leases.

So hither the get-go yous must produce is to pose the IP address of the calculator yous desire to block on  a Static IP.
Now in that place are 2 ways yous tin forcefulness out comfortably block a customer from accessing your network internet.

1. DHCP : this tin forcefulness out travel done straight from the DHCP server
2. Base on the list

Am going to exhibit yous the 2 ways here, thence am already on the DHCP.

The side past times side affair nosotros are going to produce is to position the calculator since nosotros direct keep made it static.

Double click on it to exhibit a bill of fare where nosotros volition detect a box that country block.
The exclusively affair yous require to produce is to banking concern stand upwardly for the box as well as yous volition run across the condition of the device alter to B. important that this customer is blocked thence fifty-fifty though they are connected to your network they are block from sending as well as receiving cyberspace access to your network.

Another agency is to configure your DHCP to statically issues address via the list.
And earlier yous start this 2d purpose configuration, brand that the admin calculator is pose on static IP.





So what am going to produce is to become DHCP server.

Open the address puddle as well as select static only.

click on Apply as well as ok.

At this fourth dimension if the lease expire at whatever fourth dimension the exclusively calculator or devices that volition rest on the network are the one's on static only.

Share this post