Setting Upward A Wireless Distribution System.

Setting a wireless distribution organisation tin laissez passer notice endure a niggling chip tricky, in addition to so hither am going to simplify it in addition to instruct far a do it yourself concept.

Assuming y'all bring a wireless signal inwards the get-go flooring only, coming downward in addition to going upwardly merely for network signal powerfulness non truly endure the best practice, thence in that place is require to extend rigid signal fifty-fifty to the tertiary flooring of the edifice to repose in addition to satisfy the require for network signal.

To laid a wireless distribution system, nosotros are going to role 2 wireless access points, in addition to so please

 follow my measuring below;

Step 1 makes certain that the 2 access betoken supports wireless distribution system.

Step 2 nosotros are going to configure the get-go access betoken LAN using 192.168.0.1 equally a start IP address.

Step three nosotros are going to destination the IP at 192.168.0.100

Step four nosotros are going to enable DHCP on get-go wireless access betoken only. click on DHCP-> DHCP Settings page. Choose Disable DHCP Server, in addition to click Save button

Step v nosotros are going to disable WDS on the get-go wireless access points.

The configuration for the get-go wireless access betoken is done.

Let motility over to the minute access point.

Step 1 on the minute access point, nosotros are going to configure the LAN using 192.168.101 equally a start IP address. Please banknote the difference. 

So that adjacent fourth dimension when you’re logging into the router later on y'all powerfulness bring existence logged out, you’re going to role this address. 192.168.0.101. 

The destination address on the get-go router is role to start IP on the minute router.

Step 2 nosotros are going disable DHCP for this minute wireless access point.

DHCP-> DHCP Settings page. Choose Disable DHCP Server, in addition to click Save button

.

 

Step three nosotros are going to enable WDS.

Go to Wireless -> Wireless Settings. Check Enable WDS (Enable WDS bridging). Then the page volition demo equally below.

measuring four type the SSID of the get-go wireless access betoken or click on survey or search depending on the router option.

Step v y'all volition meet the SSID of the get-go wireless access betoken click on connect.

 

The root AP’s SSID in addition to BSSID (MAC Address) volition endure filled inwards automatically. Then delight input the wireless safety settings in addition to wireless channel to match the ones on the get-go wireless access point. Click on Save.

Step six instruct to organisation tool click on reboot to reboot the access point.

y'all should bring network now.

And this answers the entire question.

But inwards the representative y'all desire to role cable/ LAN because the signal is likewise weak in addition to the minute wireless access betoken cannot pick from the get-go one.

All y'all require to do is to do the entire inwards a higher house configuration but y'all bring to disable the WDS on both wireless access point.

Share this post