How To Withdraw Mikrotik Router Ports From Slave Mode. Using Mikrotik Rb750

Even though the specification of the RB750G says that is is meant for pocket-size business office too domicile users,the RB750 is much than a pocket-size router inwards a prissy white plastic case.

It comprises of 5 independent Gigabit Ethernet ports too optional Switch Chip functionality for wired speed Gigabit throughput.

It comes compatible amongst ability adapter to ability on the router.


It’s in all probability the most affordable Multi Protocol Lan Switching capable router inwards the marketplace today. With compact blueprint too build clean looks, it volition tally perfectly into whatever SOHO environment.

With mikrotik devices y'all ca create a lot too nevertheless again, comparison to RB750, the G version adds non exclusively Gigabit capable ports, exactly besides a novel 680MHz Atheros 7161 CPU for increased throughput. Up to 580Mbps throughput amongst larger packets, too upwards to 91500pps amongst pocket-size packets!.





The RB750G tin strength out live configured for each of the ports to live on divide network too create their divide switching also.Part of the things Mikrotik has done to assist the deployment of their technology is the infusion of switching functions into routers.

Far from the features too argue for getting Influenza A virus subtype H5N1 mikrotik RB750 router, in that location are roughly configurations that bespeak to live outlines.

In this tutorial nosotros are going to explore how to withdraw mikrotik routers from a slave mode.

If y'all are used to Cisco technologies, y'all volition know why this is such a large deal. Cisco layer iii switches are quite expensive because they accept routing too switching capabilities built into them. With Mikrotik, the bespeak to buy a switch is non ever in that location every bit many ports accept been bundled together inwards a master-slave setup, giving both routing too switching features altogether.

In a setup similar that, the router has exclusively 2 logical ports fifty-fifty though in that location are upwards to 5 physical ports. This has created a work for roughly administrators inwards situations where to a greater extent than than 2 networks accept to live created. In this piece, I volition portion amongst us on how to withdraw a router port from slave mode, allowing it to business office every bit a dedicated port.

Default setup

The Ports on most Mikrotik pocket-size office/home business office routers are configured every bit listed below, past times default:


Ether1: dedicated (WAN)


Ether2: main (LAN)


Ether3: slave (LAN)


Ether4: slave(LAN)


Ether5: slave(LAN)


With this sort of setup, in that location are logically, 2 ports too tin strength out exclusively live deployed to back upwards to networks. If the network administrator desires to accept the router deployed to back upwards to a greater extent than than 2 networks, Ether3, Ether4, too Ether5 volition accept to live removed from slave trend too made dedicated.

How to withdraw a Mikrotik router port from slave mode.

Removing a port from slave trend is quite simple. To create that, click on the port y'all wish to withdraw from slave trend too laid upwards the main port to none. See images below:

Repeat these steps for all ports y'all recall to brand dedicated ports.

This is how y'all become nigh removing Mikrotik router Ports from Slave mode.

Share this post