How To Configure Dhcp Customer On Mikrotk Router

After a long run of setting upwards a DHCP Server directly nosotros possess got to setup the DHCP customer which volition automatically possess got the IP issued out yesteryear the DHCP server. So for us to create this nosotros volition possess got to follow these uncomplicated steps below

Step i : dejeuner your winbos application yesteryear Loging into the router amongst your mikrotik Winbox.

Step two : On the menu, Go to IP > DHCP Client.

Step3 : You volition run into a novel window.

Step four : Click inward the cerise summation push to add together a DHCP client

Step five : After clicking the cerise summation button, roughly other window volition appear.

Step vi : Lets destination at the source setting (Interface). The Interface is a usage of hardware on the board. Example, Ethernet(LAN) port i is an interface. Your wireless Card that is connected to the board (WAN) is an interface.

If your Mikrotik Ethernet port i is connected to your ADSL router amongst an ethernet cable, too then the Mikrotik Ethernet port i should live on a DHCP customer because this port volition have an IP address from the ADSL router. Under Interface, Select ether1 too press apply too OK.

Step seven : Now you lot volition run into that you lot possess got your ether1 searching for an IP address. In the picture below, ether2 is likewise used every bit a DHCP customer for a 3G router, if the ADSL fails.

4

Share this post