Configuring Ntp Server On A Mikrotik Router.

Today inward this tutorial am going to explicate how nosotros tin configure an NTP server on a mikrotik router.

Network Time Protocol (NTP) is a networking protocol for fourth dimension synchronization betwixt reckoner systems together with network devices over packet-switched, variable-latency information networks.

First of all nosotros must empathise why you lot need to setup this server; good the argue is that if you lot desire all the fourth dimension inward your devices to last synchronized together with then you lot need this server.

 So inward other for you lot to successfully install an NTP server on your mikrotik router, you lot volition need to brand that the parcel is install inward the router, to depository fiscal establishment tally together with verify you lot should click on system, >>>>> packages and brand certain the parcel ntp is installed.

Click hither to acquire to a greater extent than on how to install packages on mikrotik router.

So together with then to configure NTP the commencement pace is to go  this which I furnish hither http://www.pool.ntp.org

Step 2 you lot volition click on purpose the puddle together with and then it volition straight to a page displaying the servers, the adjacent pace nosotros are going to configure the puddle using the commencement together with the minute address provided on purpose the puddle page.

So hither nosotros are going to acquire dorsum to our router, click on system click on NTP server.

We are going to enable the server together with the broadcast equally good my checking the box click on apply together with ok.

 The broadcast volition last sending information, telling the entire network that is a fourth dimension server.

Next affair to create is to configure the NTP client click on system, click on NTP client, the argue for the customer is that you lot volition need a customer that is engaged on the network to enable the router synchronization, inward this category the router inward plow volition together with then redistribute the fourth dimension to others devices.

So hither nosotros are going to locomote inward the address provided on the puddle website nosotros visited earlier.

The domain name: 0.pool.ntp.org within the primary NTP server.

On the secondary nosotros volition locomote inward the minute one: 1.pool.ntp.org.

For this configuration you lot don’t need to worry near mention together with IP address because it volition automatically resolve itself. Click apply together with ok. So all you lot need to create right away is whatever where you lot accept other devices all you  need is to acquire to the customer together with locomote inward the IP address of this router together with it volition automatically acquire time.

So this is how you lot configure NTP server on your router.

Share this post